Ремонт автомобильного радиоприёмника 1980 года выпуска А-275-Э. Жёстко издеваемся друг над другом. Надеюсь, что во второй серии мы с вами его победим.
Полезные ссылки:
Бокорезы ali.pub/3h7hnb
Осциллограф got.by/44x6pd
Мультиметр точный, автоматический ali.pub/2miww0
Оловоотсос ali.pub/54r7qn
Тестер деталей, новая версия ali.pub/2po1l5 или ali.pub/55hcg9
Высоковольтный модуль ali.pub/1xqar9
Магазин качественных аккумуляторов ali.pub/1mk9dd
Паяльник с керамич. нагревателем и термодатчиком ali.pub/1c4ooy
10 жал с медью внутри ali.pub/3hxox3
Флюс ali.pub/3jluzq
Блестящий легкоплавкий припой ali.pub/45zagf
Хороший магазин радиодеталей ali.pub/31bptg
Не дешёвые, но все 100% оригинальные радиодетали ali.pub/3y6y8z
Тоже оригиналы ali.pub/45z9jk
Пульсоксиметры, лидер продаж (диагностика короновируса) ali.pub/5c1wbv
Если некоторые ссылки не работают — отключите блокировщик рекламы, или зайдите с другого браузера.
Купить железные шары: ali.pub/4t32cl
Как сделать железный шар. В видео показываю свой способ как сделать шар на токарном станке. Есть много способов выточить шар на токарном станке, теперь есть еще один. )
Хочу улучшить качество своих видео, коплю на профессиональную камеру, для тех кто хочет помочь развитию канала:
Карта Сбербанка: 5469 5200 1815 3452
Paypal — www.paypal.com/cgi-bin/webscr?cmd=_s-xclick
ПРОМО КОДЫ НА СКИДКИ
СКИДКА 10% по промо коду( EEWdBEqU) на любой продукт Мартьянов (масло, воск, лазурь и тд.) по ссылке td-martyanov.ru/?r_rid=EEWdBEqU
Ссылка на покупку инструментов на Ozon с 15% скидкой www.ozon.ru/highlight/50923/?utm_medium=vnd..
Также можно добавить этот промокод, если по ссылке не сработает DREMELMASTER
======================================================
По этому промокоду вы получите скидку на любой комплект смолы «Eliqua2020»
Эпоксидную смолу я покупаю тут vk.com/eliquaepoxy.
СТАНКИ и ИНСТРУМЕНТЫ В МОЕЙ МАСТЕРСКОЙ
Токарный станок jet clck.ru/KzQZd
Заточной станок jet clck.ru/KzQZo
Резцы токарные clck.ru/KzQa2
Металлический верстак-https://krechet-tools.ru/
Triton TSPST450 осцилляционный шпиндельно-ленточный clck.ru/M979G
JET JSJ-6 Фуговальный станок clck.ru/P5yn6
AFS-400 Система фильтрации воздуха clck.ru/P5yoR
Triton TSPSP650 Осциляционно-шпиндельная clck.ru/P5ypc
TRITON TRA001 Двухрежимный погружной фрезер с микролифтом 2400 Вт clck.ru/P5yqf
JET JRT-2 Универсальный чугунный фрезерный стол clck.ru/P5yrW
SJA100E Многофукциональные тиски-подставка clck.ru/QbpkL
Сверлильные тиски тип Q100, 100х100 мм clck.ru/QbpmP
Wilton универсальная F-образная струбцина 80х300 мм clck.ru/QbpnA
Система хранения инструмента TOOL BOARD vk.cc/alwaMU.
CK-3.75Z/S1 95мм 4-х кулачковый токарный патрон по дереву в наборе clck.ru/M979X
Чистящий карандаш для абразива clck.ru/M97A9
======================================================
Друзья, меня зовут Денис! Я автор канала denden TV. На этом канале я представляю всё то, что я делаю своими руками в своей мастерской. Интересные самоделки, полезные советы, обзоры инструментов и станков и многое другое вы сможете увидеть на моем канале!
Превращаю простые вещи в уникальные! Подписывайтесь на мой канал, Скучно точно не будет!
#Мастер #Самоделки #Сделайсам #Советы #DIY #каксделать #workshop #howto #do it yourself #homemade product
In this video im restoring an old german soldering iron.
This item was sent to me by one of my patrons from Germany. He saw it on eBay, asked me if Im interested and then he bought it. Thank you for that. Ill send it back to him now.
I really liked the look of the handle and thats why I decided to restore it. Its a propane gas powered soldering iron made by Perkeo. I dont know how old this one is, but they built them since 1919 until today. The modern ones still look pretty much the same as the one I restored in this video, they just made some small changes over the years. Im very happy how this project turned out, I really like the contrast of the dark wooden handle and the polished brass.
I hope you like my work and the video.
Huge thank you to all of my Patreon and PayPal supporters and specially to:
Paulina Zamora
afreeflyingsoul
sunniva thingstad
Micky McKay
Alan Hanson
Alex Roussos
Gregory
Joan Casanovas
John Romero
M. A.
Paul Mampilly
SA Graver
Vince Valenti
Zachary Grimes
Alejandro Cavazos
Allan Mckenzie
audi4444player
Bastian Alexander
Bloatmage
Brian Boots
Clément BERNARD
Conor Fowler
Dapper
Dave Ahern
Dawson Mertz
Drew Bell
Ernest Duran
Giambattista Martino
Guillaume Ladouceur
Harrison Hughes
Jack Champion
Jack Tian
Jake
Jeff Carr
Jeff Vier
joe
Joel Margolis
Julie Smith
justin f.
Jörg Thomsen
Kersten Rienow
Kevin
Lambapalooza
Llewellyn Schubert
Lucy Lole
Marc P
marilyne stotz
Mark Anderson
Martin Kunz
Matthew Hendrix
Matthew Ruediger
Merkias
Mikko Repka
Moeparker
Pascal Bertossa
Phoebe Knight
Ruslan Balkin
Rybread
Sasan Hezarkhani
Sebastian Wüst
Seth Feist
Sheepless
Shu
Stephen Lemon
Thibaut Hiegel
Wambaquamba
XxJonathXx
Yitch
Timestamps:
00:00 preview
00:36 disassembling
02:18 showing all the parts
02:39 cleaning the parts with the parts washer
02:57 disassemling two more parts
03:17 removing patina and soot with vinegar, salt and flour
04:07 restoring the wooden handle
04:40 restoring the big tube
06:10 stain the wooden handle
06:38 making a new ring for the wooden handle on the lathe
07:36 restoring the nut which tightens the wooden hanlde
08:04 restoring the holder of the soldering iron
08:46 restoring the sieving head and remake the knurling
09:21 restoring the sieving head cover
09:59 restoring the knurled ring
10:22 restoring the regulation part
10:47 restoring the valve needle
11:07 restoring the nut for the regulation part
11:31 restoring the valve tube
12:16 restoring the gas connection part
12:47 restoring the nut for the valve tube
13:13 restoring the nozzle
13:41 restoring the soldering iron
14:46 making a new holder for the soldering iron on the lathe, mill and welding machine
16:26 making a special countersinked bolt for the soldering iron
16:56 restoring the bolt to clamp the soldering iron holder
17:18 making a new handle for the previous restored bolt
18:47 making the steel parts black by heating up and quench in oil
19:14 showing all the parts before reassembling
19:34 reassembling
21:23 showing the finished product
22:00 final test
Time and costs of this restoration:
I was working on this project over 1,5 weeks
$16 tube for the gas connection
$1 clamp bride for the connection tube
My camera:
Panasonic HC-V180
If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, its not my language. I try my best to improve my technical english.
Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.
In this video im restoring a very old Blacksmith Leg Vise.
My friend has found this blacksmith leg vise at the junkyard. It is huge and and very heavy, over 43kg. I really liked the size of it, the very long handle and the design from the spindle and the spring, thats why I decided to restore it and make a video about it. I think this vise is around 100 years old.
What I first expected to be a simple straight foraward project turned out to be a very tricky one. After cleaning up the two big pieces with the jaws I noticed that they dont close parallel. When the jaws touched eachother on the right side, they had a 2.5mm gap on the left side. To get this restoration done properly I decided to machine them. I made an aluminium plate to clamp the vise on the milling machine. To mill the structure of the rough jaws I bought two carbide milling plates and let them customize by grinding certain angles to them. The milling worked very well and Im very happy how the jaws turned out. After the milling I did harden and temper them again.
As the holes and countersinks from the heart shaped part were very small and rough, I drilled bigger holes and made the countersinks bigger and clean for 10mm screws. I did recut the threads with a threading file, because I didnt had this threading die size.
I just cleaned up the spindle with files and emery cloth, removed scrateches and sharp edges.
The nut had a groove in it at the end, I closed it with TIG welding and turned the welding spots clean on the lathe. I sanded the rest with emery cloth and cleaned it up with a file.
I decided to mill the rectangluar washer clean, because it was very wavy and had an overall rough shape.
While I was recutting the threads from the two square nuts, I realized that they were slanted. For that reason I decided to make new ones.
I bent the spring symmetrical and grinded the very rough shape clean on the belt grinder.
After cleaning up all the parts I did sandblast them, made them black with bluing liquid and painted them with a dark green hammertone paint. After the reassembly I realized that the vise looks very dark overall with the dark green and all the black parts, so I would definitely choose a brighter colour for next time to achieve a nicer contrast. Besides that Im very happy how this project turned out. My friend who allowed me to use his milling machine to remake the jaws was very fascinated by this leg vise and he really liked it, Im going to give it to him after the restoration.
I hope you like my work and the video.
Huge thank you to all of my Patreon and PayPal supporters and specially to:
Mike Rogsch
Scott Meola
john ortega
Joel Zwahlen
Andrei Sitnikov
Mathias Lincke
Afreeflyingsoul
Micky McKay
Alan Hanson
Alex Roussos
Dan Williams
Gregory
Joan Casanovas
John Romero
Jonathan Heckerman
LVE
Paul Mampilly
SA Graver
Vince Valenti
Zachary Grimes
Timestamps:
00:00 preview
00:40 disassembling
01:24 showing all the parts
01:31 cleaning the parts with the parts washer
01:51 removing rust with MC-51
02:26 restoring the fix jaw
03:00 restoring the movable jaw
03:43 testing the jaws
04:02 sandblasting the fix and movable jaw
04:37 soften the hardened jaws
04:50 preparing to mill the jaws
05:19 machining the rough jaws on the milling machine
06:59 harden and temper the jaws
07:20 restoring the heart shaped holding plate
08:01 restoring the spindle with the handle
08:48 restoring the nut
09:55 restoring the holding plate for the spindle
10:16 restoring the rectangular washer
10:47 making two new square nuts
11:41 restoring the spring
12:20 sandblasting
13:02 making the parts black with bluing liquid
13:42 painting the parts with hammertone dark green
14:19 showing the restored blots and nut and custom washers
14:31 showing all the parts before reassembling
14:37 reassembling
15:58 showing the finished product
16:54 final test
Time and costs of this restoration:
I was working on this project over 3,5 weeks
$80 milling tools
$200 customizing the milling tools
My camera:
Panasonic HC-V180
If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, its not my language. I try my best to improve my technical english.
Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.
In this video im restoring a very old hand cranked grinder.
A few weeks ago I visited my friend and we took a closer look at his barn, looking for something interesting to restore. As soon as I saw this hand cranked grinder, I knew that this would make a nice restoration video. It was all covered in wood dust and the visble steel parts were very rusty. It was still working, but the grinding wheel was very unbalanced.
When I was cleaning the parts with the parts washer I found a lot of nails and screws in the gearbox, I guess I was very lucky that I didnt found any teeth from the gears. The pin connection from one gear was damaged very hard. I filled it all up with welding and machined all surfaces clean again.
I decided to make a brass sleeve for the wooden handle and glued it in with epoxy.
I only cleaned the grinding wheel with high pressure water and it worked very well. Due to the age of the grinder and the cleaning with the water, the two paper discs were lost. Thats why I printed two new ones with my logo on it and they turned out very nice. Theyre there to lower the pressure on the grinding wheel from the clamping.
The cover plate from the gearbox didnt fit at all, it didnt even cover everything. Because of that I decided to make a new one.
For the painting I choose a black coat, as it was originally, I used filler on it to get a nice and smooth finish.
Im very happy how this project turned out, Ill keep this item for myself for display.
I hope you like my work and the video.
Huge thank you to all of my Patreon and PayPal supporters and specially to:
Scott Meola
Afreeflyingsoul
Micky McKay
Adel AlSaffar
Alan Hanson
Alex Roussos
Andreswara Hermawan
Andrew Phillips
Dan Williams
Gregory
Joan Casanovas
John Romero
Jonas Richartz
Jonathan Heckerman
LVE
Paul Mampilly
SA Graver
Trevor Kam
Vince Valenti
Zachary Grimes
Timestamps:
00:00 preview
00:37 disassembling
02:13 showing all the parts
02:28cleaning the parts with the parts washer
02:47 removing the old paint with paint stripper
03:32 sandblasting
04:17 restoring the holder
04:39 restoring the gearbox case
05:11 restoring all shafts and gears from the gearbox
07:45 making a new pin connection
08:17 restoring the crank
08:40 restoring the wooden handle
09:05 making a brass sleeve for the wooden handle
09:51 making a steel cover for the wooden handle
10:58 making a shaft for the wooden handle
12:14 restoring the grinding wheel
13:11 making a new wooden sleeve for the grinding wheel
14:03 making a brass sleeve for the wooden sleeve
15:01 restoring the clamping disc for the grinding wheel
15:21 restoring the big shaft
15:48 making a new cover for the gearbox
16:32 restoring the joints for the big shaft
17:18 sandblasting again
17:32 bluing the steel parts
17:55 applying two component filler and sand it
18:20 applying two component primer
18:44 wet sanding
18:58 applying two component coat „jet black“ (RAL 9005)
19:30 showing the restored bolts and nuts
19:44 showing all the parts before reassembling
19:58 reassembling
22:19 showing the restored item
23:09 final test
Time and costs of this restoration:
I was working on this project over 1,5 weeks
$20 hand cranked grinder
$20 2k primer
$20 2k coat „jet black (RAL 9005)
$5 wood for the sleeve
$5 grease inlets
$0.4 thick paper for the grinding wheel
My camera:
Panasonic HC-V180
If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, its not my language. I try my best to improve my technical english.
Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.
