Отправляю первую лягушку путешественницу на дно. Сегодня на рыбалке буду использовать сразу 10 подводных камер. На нескольких подводных камерах в качестве живца прицеплю карасика для наглядного сравнения с лягушкой. Посмотрим кто понравится щуке больше: лягушка или живец. Глубина 2 метра, граница камыша. Начало декабря…
▶Inst — www.instagram.com/sorokin_podvodoi
▶TikTok — www.tiktok.com/@sorokinofficial
▶VK — vk.com/sergeisniper
#лягушка #рыбалка #щука
И вот наружная упорная резьба. Резать её начал заточенным на кануне резцом из самокала Р6М5: www.youtube.com/watch?v=5qhcCNQliRk но пошло не так как я предполагал…
In this video im restoring an old german soldering iron.
This item was sent to me by one of my patrons from Germany. He saw it on eBay, asked me if Im interested and then he bought it. Thank you for that. Ill send it back to him now.
I really liked the look of the handle and thats why I decided to restore it. Its a propane gas powered soldering iron made by Perkeo. I dont know how old this one is, but they built them since 1919 until today. The modern ones still look pretty much the same as the one I restored in this video, they just made some small changes over the years. Im very happy how this project turned out, I really like the contrast of the dark wooden handle and the polished brass.
I hope you like my work and the video.
Huge thank you to all of my Patreon and PayPal supporters and specially to:
Paulina Zamora
afreeflyingsoul
sunniva thingstad
Micky McKay
Alan Hanson
Alex Roussos
Gregory
Joan Casanovas
John Romero
M. A.
Paul Mampilly
SA Graver
Vince Valenti
Zachary Grimes
Alejandro Cavazos
Allan Mckenzie
audi4444player
Bastian Alexander
Bloatmage
Brian Boots
Clément BERNARD
Conor Fowler
Dapper
Dave Ahern
Dawson Mertz
Drew Bell
Ernest Duran
Giambattista Martino
Guillaume Ladouceur
Harrison Hughes
Jack Champion
Jack Tian
Jake
Jeff Carr
Jeff Vier
joe
Joel Margolis
Julie Smith
justin f.
Jörg Thomsen
Kersten Rienow
Kevin
Lambapalooza
Llewellyn Schubert
Lucy Lole
Marc P
marilyne stotz
Mark Anderson
Martin Kunz
Matthew Hendrix
Matthew Ruediger
Merkias
Mikko Repka
Moeparker
Pascal Bertossa
Phoebe Knight
Ruslan Balkin
Rybread
Sasan Hezarkhani
Sebastian Wüst
Seth Feist
Sheepless
Shu
Stephen Lemon
Thibaut Hiegel
Wambaquamba
XxJonathXx
Yitch
Timestamps:
00:00 preview
00:36 disassembling
02:18 showing all the parts
02:39 cleaning the parts with the parts washer
02:57 disassemling two more parts
03:17 removing patina and soot with vinegar, salt and flour
04:07 restoring the wooden handle
04:40 restoring the big tube
06:10 stain the wooden handle
06:38 making a new ring for the wooden handle on the lathe
07:36 restoring the nut which tightens the wooden hanlde
08:04 restoring the holder of the soldering iron
08:46 restoring the sieving head and remake the knurling
09:21 restoring the sieving head cover
09:59 restoring the knurled ring
10:22 restoring the regulation part
10:47 restoring the valve needle
11:07 restoring the nut for the regulation part
11:31 restoring the valve tube
12:16 restoring the gas connection part
12:47 restoring the nut for the valve tube
13:13 restoring the nozzle
13:41 restoring the soldering iron
14:46 making a new holder for the soldering iron on the lathe, mill and welding machine
16:26 making a special countersinked bolt for the soldering iron
16:56 restoring the bolt to clamp the soldering iron holder
17:18 making a new handle for the previous restored bolt
18:47 making the steel parts black by heating up and quench in oil
19:14 showing all the parts before reassembling
19:34 reassembling
21:23 showing the finished product
22:00 final test
Time and costs of this restoration:
I was working on this project over 1,5 weeks
$16 tube for the gas connection
$1 clamp bride for the connection tube
My camera:
Panasonic HC-V180
If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, its not my language. I try my best to improve my technical english.
Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.
In this video im restoring a very old hand cranked grinder.
A few weeks ago I visited my friend and we took a closer look at his barn, looking for something interesting to restore. As soon as I saw this hand cranked grinder, I knew that this would make a nice restoration video. It was all covered in wood dust and the visble steel parts were very rusty. It was still working, but the grinding wheel was very unbalanced.
When I was cleaning the parts with the parts washer I found a lot of nails and screws in the gearbox, I guess I was very lucky that I didnt found any teeth from the gears. The pin connection from one gear was damaged very hard. I filled it all up with welding and machined all surfaces clean again.
I decided to make a brass sleeve for the wooden handle and glued it in with epoxy.
I only cleaned the grinding wheel with high pressure water and it worked very well. Due to the age of the grinder and the cleaning with the water, the two paper discs were lost. Thats why I printed two new ones with my logo on it and they turned out very nice. Theyre there to lower the pressure on the grinding wheel from the clamping.
The cover plate from the gearbox didnt fit at all, it didnt even cover everything. Because of that I decided to make a new one.
For the painting I choose a black coat, as it was originally, I used filler on it to get a nice and smooth finish.
Im very happy how this project turned out, Ill keep this item for myself for display.
I hope you like my work and the video.
Huge thank you to all of my Patreon and PayPal supporters and specially to:
Scott Meola
Afreeflyingsoul
Micky McKay
Adel AlSaffar
Alan Hanson
Alex Roussos
Andreswara Hermawan
Andrew Phillips
Dan Williams
Gregory
Joan Casanovas
John Romero
Jonas Richartz
Jonathan Heckerman
LVE
Paul Mampilly
SA Graver
Trevor Kam
Vince Valenti
Zachary Grimes
Timestamps:
00:00 preview
00:37 disassembling
02:13 showing all the parts
02:28cleaning the parts with the parts washer
02:47 removing the old paint with paint stripper
03:32 sandblasting
04:17 restoring the holder
04:39 restoring the gearbox case
05:11 restoring all shafts and gears from the gearbox
07:45 making a new pin connection
08:17 restoring the crank
08:40 restoring the wooden handle
09:05 making a brass sleeve for the wooden handle
09:51 making a steel cover for the wooden handle
10:58 making a shaft for the wooden handle
12:14 restoring the grinding wheel
13:11 making a new wooden sleeve for the grinding wheel
14:03 making a brass sleeve for the wooden sleeve
15:01 restoring the clamping disc for the grinding wheel
15:21 restoring the big shaft
15:48 making a new cover for the gearbox
16:32 restoring the joints for the big shaft
17:18 sandblasting again
17:32 bluing the steel parts
17:55 applying two component filler and sand it
18:20 applying two component primer
18:44 wet sanding
18:58 applying two component coat „jet black“ (RAL 9005)
19:30 showing the restored bolts and nuts
19:44 showing all the parts before reassembling
19:58 reassembling
22:19 showing the restored item
23:09 final test
Time and costs of this restoration:
I was working on this project over 1,5 weeks
$20 hand cranked grinder
$20 2k primer
$20 2k coat „jet black (RAL 9005)
$5 wood for the sleeve
$5 grease inlets
$0.4 thick paper for the grinding wheel
My camera:
Panasonic HC-V180
If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
Sorry for my bad english, its not my language. I try my best to improve my technical english.
Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.
количество трубок 24 шт * 610 мм = 14,64 метра диаметр 15 мм длина окружности 47,12 мм. = площадь S = a · b = 47.12 · 610 = 0.0287432(м)2 * 24 = 0,68 м2 * 1,5 = 1,034 м2
e-katalog Россия www.e-katalog.ru/u/9oWNx
e-katalog Украина ek.ua/u/9oWNx
— Угольник Fit vk.cc/9STOik
Линейка Vira vk.cc/9STL8i
Торцовка AEG vk.cc/9MHcYA
Струбцина Stayer vk.cc/9STUPi
Ручной фрезер AEG vk.cc/9STRj4
Сверлильный станок Ryobi vk.cc/9MHfpI
Болгарка AEG-125 vk.cc/a04OGl
Шуруповёрт Ryobi vk.cc/a1ypXI
Ключи с храповым механизмом Vira vk.cc/9RbBdG
Рулетка Vira vk.cc/9R0p7s
— #ШколаРемонтника — это проект, посвящённый различному ремонту и отделке помещений, секретам мастерства и важным нюансам в этом деле. Проект так же затрагивает интересные #самоделки, помогающие в быту и полезные лайфхаки, которые упростят вашу жизнь. Здесь вы всё научитесь делать #СвоимиРуками. #Ремонт и #Отделка станут вам под силу! Школа Ремонтника — знания, которые точно пригодятся!
Всем привет! Вы на канале MIXFIX! Авианосцы — это часть недвижимого имущества страны в открытом море. Наверняка каждая страна в мире хотела бы иметь как можно больше авианосцев. Потребность в авианосцах, по крайней мере, во время Первой и Второй мировых войнах заключалась в доставке самолётов в место боестолкновения с материка, а это было крайне затруднительно учитывая размах театра боевых действий и скорости самолётов прошлого века. Поэтому имело смысл иметь такие авианосцы, которые обеспечивали бы присутствие страны в международных водах, вдали от ее собственных границ.
Но какие из представленных модификаций самые лучшие? Давайте выясним.
Всем привет! Вы на канале MIXFIX! Как вы думаете, какая подводная лодка является самой лучшей в мире? Какая современная ударная субмарина самая большая и самая смертоносная и почему?
Подпольные советские миллионеры – на что они тратили свои миллионы?
❗Оформите подписку на канал — bit.ly/TVcentr_Subscribe
Министр внутренних дел Николай Щёлоков, первый секретарь ЦК Компартии Узбекистана, один из фигурантов «хлопкового дела» Шараф Рашидов, музыкальный продюсер Юрий Айзеншпис, герои «текстильного дела» Борис Ройфман и Шая Шакерман – они отстраивали немыслимые по советским меркам дворцы, швырялись деньгами в ресторанах, блистали на светских вечеринках и закапывали золото в землю – просто потому, что его некуда было деть.