Друзья всем привет! Сегодня я вам покажу как сделать классный предмет интерьера своими руками. Изготавливать его буду из сосновой доски и эпоксидной смолы.
======================================================
По этому промокоду вы получите скидку на любой комплект смолы «Eliqua2020»
Эпоксидную смолу я покупаю тут vk.com/eliquaepoxy.
======================================================
ИНСТРУМЕНТЫ КОТОРЫМИ Я ПОЛЬЗУЮСЬ
классные недорогие прижимы ali.pub/4gbso9
не дорогие струбцины ali.pub/50k4yf
набор ступенчатых сверл ali.pub/50k6xz
насадка заклепочник ali.pub/50k6w8
кондуктор под косой шуруп ali.pub/4gbs6y
аналог угольника Свенсона ali.pub/4gbsv9
ступенчатое сверло ali.pub/4gbt40
струбцины ali.pub/4gbtb0
аналог KREG ali.pub/4gbth1
корончатое сверло ali.pub/50k76x
сверло Форстнера ali.pub/4gbtyx
набор фрез ali.pub/4gbu5x
точилка ali.pub/4gbuae
аккумуляторы ali.pub/4gbuj5
термоусадка ali.pub/4gbuos
универсальный ключ ali.pub/4gbutu
трубная струбцина ali.pub/4gbuza
Т-трек ali.pub/4gbv2l
ременная струбцина ali.pub/4gbv9e
универсальная головка ali.pub/4gbvdo
пластина для фрезера ali.pub/4gbvlu
фурнитура для откидного стола ali.pub/4gbvq4
подшипники ali.pub/4gbw3x

ПРОМО КОДЫ НА СКИДКИ
СКИДКА 10% по промо коду( EEWdBEqU) на любой продукт Мартьянов (масло, воск, лазурь и тд.) по ссылке td-martyanov.ru/?r_rid=EEWdBEqU
============================================================
Ссылка на покупку инструментов на Ozon с 15% скидкой
www.ozon.ru/highlight/50923/?utm_medium=vnd..
Также можно добавить этот промокод, если по ссылке не сработает DREMELMASTER

СТАНКИ и ИНСТРУМЕНТЫ В МОЕЙ МАСТЕРСКОЙ
Токарный станок jet clck.ru/KzQZd
Заточной станок jet clck.ru/KzQZo
Резцы токарные clck.ru/KzQa2
Металлический верстак-https://krechet-tools.ru/
Triton TSPST450 осцилляционный шпиндельно-ленточный clck.ru/M979G
JET JSJ-6 Фуговальный станок clck.ru/P5yn6
AFS-400 Система фильтрации воздуха clck.ru/P5yoR
Triton TSPSP650 Осциляционно-шпиндельная clck.ru/P5ypc
TRITON TRA001 Двухрежимный погружной фрезер с микролифтом 2400 Вт clck.ru/P5yqf
JET JRT-2 Универсальный чугунный фрезерный стол clck.ru/P5yrW
SJA100E Многофукциональные тиски-подставка clck.ru/QbpkL
Сверлильные тиски тип Q100, 100х100 мм clck.ru/QbpmP
Wilton универсальная F-образная струбцина 80х300 мм clck.ru/QbpnA
Система хранения инструмента TOOL BOARD vk.cc/alwaMU.
CK-3.75Z/S1 95мм 4-х кулачковый токарный патрон по дереву в наборе clck.ru/M979X
Чистящий карандаш для абразива clck.ru/M97A9
======================================================
Друзья, меня зовут Денис! Я автор канала denden TV. На этом канале я представляю всё то, что я делаю своими руками в своей мастерской. Интересные самоделки, полезные советы, обзоры инструментов и станков и многое другое вы сможете увидеть на моем канале!
Превращаю простые вещи в уникальные! Подписывайтесь на мой канал, Скучно точно не будет!
#Мастер #Самоделки #Сделайсам #Советы #DIY #каксделать

======================================================

ЕСЛИ ВЫ ХОТИТЕ ПОДДЕРЖАТЬ МОЙ КАНАЛ

webmoney P764688649747

=====================================================

ССЫЛКА НА МОЙ КАНАЛ www.youtube.com/channel/UCfMg...

ПОЧТА ДЛЯ СОТРУДНИЧЕСТВА denden150379@gmail.com
======================================================

МОЙ ДЗЕН: clck.ru/QNGWB

МОЙ ВК: vk.com/dendentv

ИНСТАГРАМ: www.instagram.com/denden150379

ВСЯ МУЗЫКА: player.epidemicsound.com/

Music by Kevin MacLeod. Available under the Creative Commons Attribution 3.0 Unported license. Download link: incompetech.com/music/royalty-free/index.html?isrc=USUAN1200020

Тест драйв и обзор джили тугелла 2020
► Я в Вконтакте — vk.com/prodriveyoutube
► Я в Инстаграм — www.instagram.com/serjo_prodrive/
► Мой ТИК ТОК — vm.tiktok.com/c4NAsx/
►Сотрудничество/Реклама — prodrivepr@gmail.com
— ПОДКЛЮЧАЙСЯ к МОЕЙ ПАРТНЕРКЕ и ЗАРАБАТЫВАЙ — yoola.app/r/6115825370372

Господа!
В этом ролике, мы обсудим с вами Suzuki Jimny в новом кузове. Поговорим о его отличиях от прежней версии и как всегда, сделаем это максимально наглядно.
Заранее приносим извинение за грязную машину, съемка была внеплановой, это своего рода экспромт!

Наш сайт — www.grandvitara-club.ru
Наша группа в вк — vk.com/club175837818
Наши контакты — grandvitara-club.ru/kontakty

В этом видео Вы узнаете как собрать, напечатанного на 3D принтере, шагающего робота, которым можно управлять с любого смартфона. Так же Вас ждёт гонка робота и шагающего механизма по прямой, на дистанцию в один… метр =)

Любишь читать описание? Молодцом! Держи секретный промокод на 5% скидку в магазине с хорошим выбором пластика и расходниками для наших принтеров. Ассортимент скоро подвезут. Промокод — AKW. prozhektor8kvt.ecwid.com/

► Мой проект — www.thingiverse.com/thing:3278855
► Проект под сервы MG90, который можно использовать как основу — www.thingiverse.com/thing:2825097

►Приложение для управления — apkpure.com/bluetooth-spp-tools-pro/mobi.dzs.android.BLE_SPP_PRO

▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Поддержать канал — www.donationalerts.com/r/akw
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬

Ссылки на соц. сети:
► vk.com/alexkorvinworkshop
► www.instagram.com/alexkorvinworkshop/

Видео подобного формата уже было на канале, решил повторить.
Вся смена, вырезаны только: перекуры, обед и мои перемещения к прессу и обратно.
Воспроизведение увеличено в 2х, кто пожелает-уменьшит до 0,5х, кому не интересно-просто перемотает.

In this video im restoring an old german soldering iron.

This item was sent to me by one of my patrons from Germany. He saw it on eBay, asked me if Im interested and then he bought it. Thank you for that. Ill send it back to him now.
I really liked the look of the handle and thats why I decided to restore it. Its a propane gas powered soldering iron made by Perkeo. I dont know how old this one is, but they built them since 1919 until today. The modern ones still look pretty much the same as the one I restored in this video, they just made some small changes over the years. Im very happy how this project turned out, I really like the contrast of the dark wooden handle and the polished brass.

I hope you like my work and the video.

Huge thank you to all of my Patreon and PayPal supporters and specially to:

Paulina Zamora
afreeflyingsoul
sunniva thingstad
Micky McKay
Alan Hanson
Alex Roussos
Gregory
Joan Casanovas
John Romero
M. A.
Paul Mampilly
SA Graver
Vince Valenti
Zachary Grimes
Alejandro Cavazos
Allan Mckenzie
audi4444player
Bastian Alexander
Bloatmage
Brian Boots
Clément BERNARD
Conor Fowler
Dapper
Dave Ahern
Dawson Mertz
Drew Bell
Ernest Duran
Giambattista Martino
Guillaume Ladouceur
Harrison Hughes
Jack Champion
Jack Tian
Jake
Jeff Carr
Jeff Vier
joe
Joel Margolis
Julie Smith
justin f.
Jörg Thomsen
Kersten Rienow
Kevin
Lambapalooza
Llewellyn Schubert
Lucy Lole
Marc P
marilyne stotz
Mark Anderson
Martin Kunz
Matthew Hendrix
Matthew Ruediger
Merkias
Mikko Repka
Moeparker
Pascal Bertossa
Phoebe Knight
Ruslan Balkin
Rybread
Sasan Hezarkhani
Sebastian Wüst
Seth Feist
Sheepless
Shu
Stephen Lemon
Thibaut Hiegel
Wambaquamba
XxJonathXx
Yitch

Timestamps:

00:00 preview
00:36 disassembling
02:18 showing all the parts
02:39 cleaning the parts with the parts washer
02:57 disassemling two more parts
03:17 removing patina and soot with vinegar, salt and flour
04:07 restoring the wooden handle
04:40 restoring the big tube
06:10 stain the wooden handle
06:38 making a new ring for the wooden handle on the lathe
07:36 restoring the nut which tightens the wooden hanlde
08:04 restoring the holder of the soldering iron
08:46 restoring the sieving head and remake the knurling
09:21 restoring the sieving head cover
09:59 restoring the knurled ring
10:22 restoring the regulation part
10:47 restoring the valve needle
11:07 restoring the nut for the regulation part
11:31 restoring the valve tube
12:16 restoring the gas connection part
12:47 restoring the nut for the valve tube
13:13 restoring the nozzle
13:41 restoring the soldering iron
14:46 making a new holder for the soldering iron on the lathe, mill and welding machine
16:26 making a special countersinked bolt for the soldering iron
16:56 restoring the bolt to clamp the soldering iron holder
17:18 making a new handle for the previous restored bolt
18:47 making the steel parts black by heating up and quench in oil
19:14 showing all the parts before reassembling
19:34 reassembling
21:23 showing the finished product
22:00 final test

Time and costs of this restoration:

I was working on this project over 1,5 weeks
$16 tube for the gas connection
$1 clamp bride for the connection tube

My camera:
Panasonic HC-V180

If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.

Sorry for my bad english, its not my language. I try my best to improve my technical english.

Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.

Thank you for watching :-)

My Patreon Page:
www.patreon.com/mymechanics

Follow me on Instagram:
www.instagram.com/my_mechanics/

In this video im restoring a very old Blacksmith Leg Vise.

My friend has found this blacksmith leg vise at the junkyard. It is huge and and very heavy, over 43kg. I really liked the size of it, the very long handle and the design from the spindle and the spring, thats why I decided to restore it and make a video about it. I think this vise is around 100 years old.
What I first expected to be a simple straight foraward project turned out to be a very tricky one. After cleaning up the two big pieces with the jaws I noticed that they dont close parallel. When the jaws touched eachother on the right side, they had a 2.5mm gap on the left side. To get this restoration done properly I decided to machine them. I made an aluminium plate to clamp the vise on the milling machine. To mill the structure of the rough jaws I bought two carbide milling plates and let them customize by grinding certain angles to them. The milling worked very well and Im very happy how the jaws turned out. After the milling I did harden and temper them again.
As the holes and countersinks from the heart shaped part were very small and rough, I drilled bigger holes and made the countersinks bigger and clean for 10mm screws. I did recut the threads with a threading file, because I didnt had this threading die size.
I just cleaned up the spindle with files and emery cloth, removed scrateches and sharp edges.
The nut had a groove in it at the end, I closed it with TIG welding and turned the welding spots clean on the lathe. I sanded the rest with emery cloth and cleaned it up with a file.
I decided to mill the rectangluar washer clean, because it was very wavy and had an overall rough shape.
While I was recutting the threads from the two square nuts, I realized that they were slanted. For that reason I decided to make new ones.
I bent the spring symmetrical and grinded the very rough shape clean on the belt grinder.
After cleaning up all the parts I did sandblast them, made them black with bluing liquid and painted them with a dark green hammertone paint. After the reassembly I realized that the vise looks very dark overall with the dark green and all the black parts, so I would definitely choose a brighter colour for next time to achieve a nicer contrast. Besides that Im very happy how this project turned out. My friend who allowed me to use his milling machine to remake the jaws was very fascinated by this leg vise and he really liked it, Im going to give it to him after the restoration.

I hope you like my work and the video.

Huge thank you to all of my Patreon and PayPal supporters and specially to:

Mike Rogsch
Scott Meola
john ortega
Joel Zwahlen
Andrei Sitnikov
Mathias Lincke
Afreeflyingsoul
Micky McKay
Alan Hanson
Alex Roussos
Dan Williams
Gregory
Joan Casanovas
John Romero
Jonathan Heckerman
LVE
Paul Mampilly
SA Graver
Vince Valenti
Zachary Grimes

Timestamps:

00:00 preview
00:40 disassembling
01:24 showing all the parts
01:31 cleaning the parts with the parts washer
01:51 removing rust with MC-51
02:26 restoring the fix jaw
03:00 restoring the movable jaw
03:43 testing the jaws
04:02 sandblasting the fix and movable jaw
04:37 soften the hardened jaws
04:50 preparing to mill the jaws
05:19 machining the rough jaws on the milling machine
06:59 harden and temper the jaws
07:20 restoring the heart shaped holding plate
08:01 restoring the spindle with the handle
08:48 restoring the nut
09:55 restoring the holding plate for the spindle
10:16 restoring the rectangular washer
10:47 making two new square nuts
11:41 restoring the spring
12:20 sandblasting
13:02 making the parts black with bluing liquid
13:42 painting the parts with hammertone dark green
14:19 showing the restored blots and nut and custom washers
14:31 showing all the parts before reassembling
14:37 reassembling
15:58 showing the finished product
16:54 final test

Time and costs of this restoration:

I was working on this project over 3,5 weeks
$80 milling tools
$200 customizing the milling tools

My camera:
Panasonic HC-V180

If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.

Sorry for my bad english, its not my language. I try my best to improve my technical english.

Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.

Thank you for watching :-)

My Patreon Page:
www.patreon.com/mymechanics

Follow me on Instagram:
www.instagram.com/my_mechanics/

In this video im restoring a very old hand cranked grinder.

A few weeks ago I visited my friend and we took a closer look at his barn, looking for something interesting to restore. As soon as I saw this hand cranked grinder, I knew that this would make a nice restoration video. It was all covered in wood dust and the visble steel parts were very rusty. It was still working, but the grinding wheel was very unbalanced.
When I was cleaning the parts with the parts washer I found a lot of nails and screws in the gearbox, I guess I was very lucky that I didnt found any teeth from the gears. The pin connection from one gear was damaged very hard. I filled it all up with welding and machined all surfaces clean again.
I decided to make a brass sleeve for the wooden handle and glued it in with epoxy.
I only cleaned the grinding wheel with high pressure water and it worked very well. Due to the age of the grinder and the cleaning with the water, the two paper discs were lost. Thats why I printed two new ones with my logo on it and they turned out very nice. Theyre there to lower the pressure on the grinding wheel from the clamping.
The cover plate from the gearbox didnt fit at all, it didnt even cover everything. Because of that I decided to make a new one.
For the painting I choose a black coat, as it was originally, I used filler on it to get a nice and smooth finish.
Im very happy how this project turned out, Ill keep this item for myself for display.

I hope you like my work and the video.

Huge thank you to all of my Patreon and PayPal supporters and specially to:

Scott Meola
Afreeflyingsoul
Micky McKay
Adel AlSaffar
Alan Hanson
Alex Roussos
Andreswara Hermawan
Andrew Phillips
Dan Williams
Gregory
Joan Casanovas
John Romero
Jonas Richartz
Jonathan Heckerman
LVE
Paul Mampilly
SA Graver
Trevor Kam
Vince Valenti
Zachary Grimes

Timestamps:

00:00 preview
00:37 disassembling
02:13 showing all the parts
02:28cleaning the parts with the parts washer
02:47 removing the old paint with paint stripper
03:32 sandblasting
04:17 restoring the holder
04:39 restoring the gearbox case
05:11 restoring all shafts and gears from the gearbox
07:45 making a new pin connection
08:17 restoring the crank
08:40 restoring the wooden handle
09:05 making a brass sleeve for the wooden handle
09:51 making a steel cover for the wooden handle
10:58 making a shaft for the wooden handle
12:14 restoring the grinding wheel
13:11 making a new wooden sleeve for the grinding wheel
14:03 making a brass sleeve for the wooden sleeve
15:01 restoring the clamping disc for the grinding wheel
15:21 restoring the big shaft
15:48 making a new cover for the gearbox
16:32 restoring the joints for the big shaft
17:18 sandblasting again
17:32 bluing the steel parts
17:55 applying two component filler and sand it
18:20 applying two component primer
18:44 wet sanding
18:58 applying two component coat „jet black“ (RAL 9005)
19:30 showing the restored bolts and nuts
19:44 showing all the parts before reassembling
19:58 reassembling
22:19 showing the restored item
23:09 final test

Time and costs of this restoration:

I was working on this project over 1,5 weeks
$20 hand cranked grinder
$20 2k primer
$20 2k coat „jet black (RAL 9005)
$5 wood for the sleeve
$5 grease inlets
$0.4 thick paper for the grinding wheel

My camera:
Panasonic HC-V180

If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.

Sorry for my bad english, its not my language. I try my best to improve my technical english.

Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.

Thank you for watching :-)

my mechanics T-Shirts:
teespring.com/stores/my-mechanics

My Patreon Page:
www.patreon.com/mymechanics

Follow me on Instagram:
www.instagram.com/my_mechanics/

In this video im restoring an antique ox-tongue iron.

The ox-tongue iron is named for the particular shape of the insert. It was used in the late 19th century.
I bought this one on eBay for $25. The condition of this item was not too bad in terms of rust. Unfortunately the ox-tongue insert was missing. The handle had play because one nut of the two bolts was missing. During the dissasembling I realized that it had asbestos as termal isolation, I replaced it with parts made out of duroplastic. Duroplastic does not melt, its heat resistant up to around 300°C. As the holes of the handle were not centered, I decided to drill them up and close them with glued in pins. One of the two bolts of the handle was bent, one nut and washer was missing and the used washer was too big. Thats why I decided to make it all new. The door didnt fit at all, so I welded up the holes, and made new ones until the door sit flush with the top of the iron. After that I was able to make the outer contur fit. I choose to turn a few parts black. After the first sandblasting I removed all the scratches and pitting with sanding and then I sandblasted them again to achieve a very nice and even surface finish. The bluing then makes a very nice matte shiny look. I decided to polish the body, but I used bluing on the inside for rust protection.
Overall I really like the look from this iron, how the colors of the wood, the black steel and the polished steel play with eachother.

I hope you like my work and the video.

Huge thank you to all of my Patreon and PayPal supporters and specially to:

Afreeflyingsoul
Gregory
Adel AlSaffar
Alan Hanson
Amanda Taylor, Esq
Andreswara Hermawan
Andrew Phillips
audi4444player
Courtney Maleport
Dan Williams
David Barker
Dre Gilley
Ethan Hartley
Hunter R.
JD Smith
Jonas Richartz
Kelly Imgrund
LVE
Martin Rønnow Klarlund
Mellissa Marcus
Nick Cannon
Paul Ambry
Paul Mampilly
Trevor Kam
TRG Restoration
Vince Valenti
Yale Baker

Timestamps:

00:00 preview
00:32 disassembling
01:41 showing all the parts
01:59 sandblasting
02:52 restoring the body
04:27 restoring the hinge
06:07 restoring the bolts
06:47 restoring the door
09:28 restoring the wooden handle
11:43 making new bolts, nuts and washers on the lathe
13:49 restoring the holder for the handle
14:24 restoring the reflector plate
15:10 showing the new parts out of duroplastic
15:17 making a new ox-tongue insert
17:22 making a new handle to hold the ox-tongue insert
20:51 showing the parts before reassembling
21:06 reassembling
22:34showing the finished restoration
23:36 final test

Time and costs of this restoration:

I was working on this project for 3 week
$25 ox-tongue iron
$2 wooden pins for the handle
$15 material for the ox-tongue and handle
$40 reverse countersink hand tool
$10 wax for wood
$20 angle screwdrivers

My camera:
Panasonic HC-V180

If you have any questions about the process, machines im using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.

Sorry for my bad english, its not my language. I try my best to improve my technical english.

Subscribe for more of my content. Im uploading videos about mechanical stuff, as new creations and buildings and also restorations.

Thank you for watching :-)

„I make a new one“ T-Shirts:
teespring.com/stores/my-mechanics

My Second Channel:
www.youtube.com/channel/UC4EQCwfH54ieNPswtXh5K0w

My Patreon Page:
www.patreon.com/mymechanics

Follow me on Instagram:
www.instagram.com/my_mechanics/

My Facebook Page:
www.facebook.com/My-mechanics-1966277857002099/